From aseques at gmail.com  Mon Dec  1 01:01:10 2008
From: aseques at gmail.com (Joan)
Date: Mon, 1 Dec 2008 10:01:10 +0100
Subject: [RTPproxy Users] Kamilio integration with rtpproxy
In-Reply-To: <49306ECC.4050709@sippysoft.com>
References: <b245e6760811200939gce214d3qc4253f2de9de3abc@mail.gmail.com>
	<49272369.5020003@sippysoft.com>
	<b245e6760811240122w4dc8f3fv5cd7662b5430fc5b@mail.gmail.com>
	<492A80C2.7080105@pernau.at>
	<b245e6760811250355lbe96364tcf88de22fdb6ffc@mail.gmail.com>
	<492BEA9D.4020104@sippysoft.com>
	<b245e6760811250547u2b3f319ek3da7ac7588b786e1@mail.gmail.com>
	<492FBD74.9060201@sippysoft.com>
	<b245e6760811280349p27b43061iae2ae331974296b4@mail.gmail.com>
	<49306ECC.4050709@sippysoft.com>
Message-ID: <b245e6760812010101n2b695da3t38bf648563605fe8@mail.gmail.com>

2008/11/28 Maxim Sobolev <sobomax at sippysoft.com>:
> Joan wrote:
>>
>> 2008/11/28 Maxim Sobolev <sobomax at sippysoft.com>:
>>>
>>> Joan wrote:
>>>>
>>>> DBUG:handle_command: received command "9506_2 U
>>>> d3a1ce5e-5fb88aab at 192.168.2.50 192.168.253.12 16434
>>>> f0cdb2c2aee55197o0;1"
>>>> INFO:handle_command: new session d3a1ce5e-5fb88aab at 192.168.2.50, tag
>>>> f0cdb2c2aee55197o0;1 requested, type strong
>>>> ERR:handle_command: can't create listener
>>>> DBUG:doreply: sending reply "9506_2 E10
>>>
>>> That's weird. The only case when the RTPproxy can fail like this is when
>>> it cannot allocate a UDP ports for the session, either due to ports
>>> already taken by other application or due to kernel not allowing to use
>>> any ports in the specified range (EADDRINUSE or EACCES). Can you please
>>> answer the following questions to help me identify the issue:
>>>
>>> 1. Did you make any changes to the sources or defines?
>>>
>> No, the only change I made was with the include, the one already
>> commited into trunk.
>> Currently I've built from a clean "cvs up"
>
> OK, can you please apply the attached patch, recompile, restart and send the
> error output again.
>
Here it is ...

===================================================================
INFO:main: rtpproxy started, pid 27680
DBUG:handle_command: received command "27663_4 U
d8a6bbb6-9895f7c3 at 192.168.2.50 192.168.253.12 16482
a8c6a31ab42697afo0;1"
INFO:handle_command: new session d8a6bbb6-9895f7c3 at 192.168.2.50, tag
a8c6a31ab42697afo0;1 requested, type strong
ERR:create_twinlistener: can't bind to the IPv4 port 36777: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 42645: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 53065: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 47223: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 38205: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 64181: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 40471: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 37527: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 38953: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 59449: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 52493: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 51385: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 42897: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 58173: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 36601: Address
already in use
ERR:create_twinlistener: can't bind to the IPv4 port 45197: Address
already in use
===================================================================

This is going on and on continuously until I hang the call and then I see

===================================================================
ERR:handle_command: can't create listener
DBUG:doreply: sending reply "27663_4 E10
"
DBUG:handle_command: received command "27662_3 D
d8a6bbb6-9895f7c3 at 192.168.2.50 a8c6a31ab42697afo0"
INFO:handle_command: delete request failed: session
d8a6bbb6-9895f7c3 at 192.168.2.50, tags a8c6a31ab42697afo0/NONE not found
DBUG:doreply: sending reply "27662_3 E8
"
===================================================================

Hope it helps

From sobomax at sippysoft.com  Mon Dec  1 01:46:31 2008
From: sobomax at sippysoft.com (Maxim Sobolev)
Date: Mon, 01 Dec 2008 01:46:31 -0800
Subject: [RTPproxy Users] Kamilio integration with rtpproxy
In-Reply-To: <b245e6760812010101n2b695da3t38bf648563605fe8@mail.gmail.com>
References: <b245e6760811200939gce214d3qc4253f2de9de3abc@mail.gmail.com>	<49272369.5020003@sippysoft.com>	<b245e6760811240122w4dc8f3fv5cd7662b5430fc5b@mail.gmail.com>	<492A80C2.7080105@pernau.at>	<b245e6760811250355lbe96364tcf88de22fdb6ffc@mail.gmail.com>	<492BEA9D.4020104@sippysoft.com>	<b245e6760811250547u2b3f319ek3da7ac7588b786e1@mail.gmail.com>	<492FBD74.9060201@sippysoft.com>	<b245e6760811280349p27b43061iae2ae331974296b4@mail.gmail.com>	<49306ECC.4050709@sippysoft.com>
	<b245e6760812010101n2b695da3t38bf648563605fe8@mail.gmail.com>
Message-ID: <4933B277.3090109@sippysoft.com>

Joan,

Were there any other calls going through the machine at the very same 
time? For some reason the RTPproxy was unable to locate any spare port, 
do you run any other software that use lot of UDP ports on that machine?

Can you please send output of the "netstat -uap" command?

Joan wrote:
> 2008/11/28 Maxim Sobolev <sobomax at sippysoft.com>:
>> Joan wrote:
>>> 2008/11/28 Maxim Sobolev <sobomax at sippysoft.com>:
>>>> Joan wrote:
>>>>> DBUG:handle_command: received command "9506_2 U
>>>>> d3a1ce5e-5fb88aab at 192.168.2.50 192.168.253.12 16434
>>>>> f0cdb2c2aee55197o0;1"
>>>>> INFO:handle_command: new session d3a1ce5e-5fb88aab at 192.168.2.50, tag
>>>>> f0cdb2c2aee55197o0;1 requested, type strong
>>>>> ERR:handle_command: can't create listener
>>>>> DBUG:doreply: sending reply "9506_2 E10
>>>> That's weird. The only case when the RTPproxy can fail like this is when
>>>> it cannot allocate a UDP ports for the session, either due to ports
>>>> already taken by other application or due to kernel not allowing to use
>>>> any ports in the specified range (EADDRINUSE or EACCES). Can you please
>>>> answer the following questions to help me identify the issue:
>>>>
>>>> 1. Did you make any changes to the sources or defines?
>>>>
>>> No, the only change I made was with the include, the one already
>>> commited into trunk.
>>> Currently I've built from a clean "cvs up"
>> OK, can you please apply the attached patch, recompile, restart and send the
>> error output again.
>>
> Here it is ...

Regards,
-- 
Maksym Sobolyev
Sippy Software, Inc.
Internet Telephony (VoIP) Experts
T/F: +1-646-651-1110
Web: http://www.sippysoft.com
MSN: sales at sippysoft.com
Skype: SippySoft

From aseques at gmail.com  Mon Dec  1 05:22:36 2008
From: aseques at gmail.com (Joan)
Date: Mon, 1 Dec 2008 14:22:36 +0100
Subject: [RTPproxy Users] Kamilio integration with rtpproxy
In-Reply-To: <4933B277.3090109@sippysoft.com>
References: <b245e6760811200939gce214d3qc4253f2de9de3abc@mail.gmail.com>
	<492A80C2.7080105@pernau.at>
	<b245e6760811250355lbe96364tcf88de22fdb6ffc@mail.gmail.com>
	<492BEA9D.4020104@sippysoft.com>
	<b245e6760811250547u2b3f319ek3da7ac7588b786e1@mail.gmail.com>
	<492FBD74.9060201@sippysoft.com>
	<b245e6760811280349p27b43061iae2ae331974296b4@mail.gmail.com>
	<49306ECC.4050709@sippysoft.com>
	<b245e6760812010101n2b695da3t38bf648563605fe8@mail.gmail.com>
	<4933B277.3090109@sippysoft.com>
Message-ID: <b245e6760812010522w11407249s35d926ce4611f661@mail.gmail.com>

2008/12/1 Maxim Sobolev <sobomax at sippysoft.com>:
> Joan,
>
> Were there any other calls going through the machine at the very same
> time? For some reason the RTPproxy was unable to locate any spare port,
> do you run any other software that use lot of UDP ports on that machine?
>
This is a testing environment, the only calls in the system are the
ones I'm doing, and there's only a single phone registered to to the
calls.
There's no much more on the machine other than a apache to manage the
phpmyadmin...

>
> Can you please send output of the "netstat -uap" command?
>
Proto Recv-Q Send-Q Local Address           Foreign Address
State       PID/Program name
udp        0      0 localhost:46090         localhost:15000
ESTABLISHED 31163/kamailio
udp        0      0 localhost:15000         *:*
         31180/rtpproxy
udp        0      0 localhost:34863         localhost:15000
ESTABLISHED 31171/kamailio
udp        0      0 localhost:34742         localhost:15000
ESTABLISHED 31165/kamailio
udp        0      0 localhost:47033         localhost:15000
ESTABLISHED 31172/kamailio
udp        0      0 localhost:35262         localhost:15000
ESTABLISHED 31170/kamailio
udp        0      0 localhost:41407         localhost:15000
ESTABLISHED 31168/kamailio
udp        0      0 192.168.253.98:sip      *:*
         31162/kamailio
udp        0      0 localhost:sip           *:*
         31162/kamailio
udp        0      0 localhost:42181         localhost:15000
ESTABLISHED 31174/kamailio
udp        0      0 localhost:41813         localhost:15000
ESTABLISHED 31166/kamailio
udp        0      0 localhost:55255         localhost:15000
ESTABLISHED 31164/kamailio
udp        0      0 localhost:42585         localhost:15000
ESTABLISHED 31167/kamailio


>
> Joan wrote:
>> 2008/11/28 Maxim Sobolev <sobomax at sippysoft.com>:
>>> Joan wrote:
>>>> 2008/11/28 Maxim Sobolev <sobomax at sippysoft.com>:
>>>>> Joan wrote:
>>>>>> DBUG:handle_command: received command "9506_2 U
>>>>>> d3a1ce5e-5fb88aab at 192.168.2.50 192.168.253.12 16434
>>>>>> f0cdb2c2aee55197o0;1"
>>>>>> INFO:handle_command: new session d3a1ce5e-5fb88aab at 192.168.2.50, tag
>>>>>> f0cdb2c2aee55197o0;1 requested, type strong
>>>>>> ERR:handle_command: can't create listener
>>>>>> DBUG:doreply: sending reply "9506_2 E10
>>>>> That's weird. The only case when the RTPproxy can fail like this is when
>>>>> it cannot allocate a UDP ports for the session, either due to ports
>>>>> already taken by other application or due to kernel not allowing to use
>>>>> any ports in the specified range (EADDRINUSE or EACCES). Can you please
>>>>> answer the following questions to help me identify the issue:
>>>>>
>>>>> 1. Did you make any changes to the sources or defines?
>>>>>
>>>> No, the only change I made was with the include, the one already
>>>> commited into trunk.
>>>> Currently I've built from a clean "cvs up"
>>> OK, can you please apply the attached patch, recompile, restart and send the
>>> error output again.
>>>
>> Here it is ...
>
> Regards,
> --
> Maksym Sobolyev
> Sippy Software, Inc.
> Internet Telephony (VoIP) Experts
> T/F: +1-646-651-1110
> Web: http://www.sippysoft.com
> MSN: sales at sippysoft.com
> Skype: SippySoft
> _______________________________________________
> Users mailing list
> Users at rtpproxy.org
> http://lists.rtpproxy.org/mailman/listinfo/users
>